|
|
|
Dynamic Torque Sensor Flanged Type
-
TTD-FF-100NM-50KNM
|
 Back
|
|
|
|
|
Model
|
:
|
|
TTD-FF
|
|
Capacity
|
:
|
|
100NM - 50KNM
|
|
Load Direction
|
:
|
|
Clock & Anticlock Wise
|
|
Type
|
:
|
|
Torque Sensor / Transducer - Flange to Flange - Dynamic
,
Torque Sensor / Transducer - Flange to Flange - Static
,
Torque Transducer / Torque Sensor Flange - Squere Drive Type
|
|
Industries
|
|
-
Power Generation
-
Defence
-
Fertilizer , Cement , Chemical , Steel industries
-
Rigging
-
R & D Establishments
-
Pharmaceutical
-
Onshore & Offeshore Drilling
-
Manufacturing
-
Machine Building
-
Energy
-
Automation Machineries
-
Assembly Lines
-
Agriculture
-
Aerospace
|
|
Application
|
|
-
Assembly Processes
-
Automotive Research
-
Axle Shaft Torsion Testing
-
Brake Torque Measurement
-
Pharmaceutical Machines
-
Torque in Alternator,Pump,Turbine Engines
-
Torque in Automobile Testing of Drive Shaft & Crank Shaft
-
Torque in Cranck Shaft
-
Torque in Electric,Hydrolic,Pneumatic Motors
-
Torque in Starter,Slip Ring,Brush,Cultch & Brake
-
Torque Measurement in Automotive & Aerospace
-
Torque Measurement in Industrial Valves & Actuators
|
|
Description
|
:
|
|
ADI ARTECH’S Torque transducer TTD-FF is flanged type general purpose dynamic rotary type sensor for accurate measurement of Torque in rotating equipment. It is constructed from hardened Tool Steel material. This is strain gage based sensor with full temperature compensation over 050C. It is very accurate, reliable and sturdy for industrial applications. It is compensated for axial and bending forces for precise torque measurements. It is available from 0-100NM to 0-50KNM ranges. Torque sensing shaft is installed with high quality, low noise slip ring and brush mechanism. We offer wide variety of options: both ends shaft, both ends flange and combination of shaft & flange versions for dynamic torque measurements. It is available for speed up to 2500 RPM max. Customized version can be provided as per user’s dimensions and capacity.
|
|
Features
|
:
|
|
Standard Ranges-0-100NM TO 0-50KNM.
Hardened Tool Steel construction for resistance against shock and overload.
Can be designed to fit your dimensional needs.
Other capacities are available on request.
|
|
Electronic Instrumentation / Software
|
:
|
|
6 digit Digital display with –
0.5% accuracy
Tare, Net and Gross data display,
Peak Hold facility,
0-10 Volt DC or 4-20 m A output for PLC interface,
10 point linearization,
Serial interface port of RS232 or RS485 or USB with MODBUS RTU protocol or Ethernet Connection,
Software for Graphics, Tabulation and Analysis,
Over load detector with relay output for alarm and trip action for safety,
Multipoint point logger,
Multipoint relay output with Auto/manual Tare, Auto/Manual Start, Stop controller
Large Digit Remote Display.
Wireless Radio Transmitter for remote Display or Computer Interface.
D’cell digital module internally fitted to the sensor or externally connected.
|
|
|
|
|