HOME
PRODUCTS
SOFTWARE
KNOWLEDGE
ABOUT ADI ARTECH
WHY ADI ARTECH
CLIENTS
OUR INFRASTRUCTURE
CONTACT US
Products
Home
Products
Search by Parameters
Single Point Offcenter Load Cells
S Beam Load Cells
Shear Beam Load Cells
Canister Type Compression Load Cells
Low Profile Pan Cake Load Cells
Force Tension Load Cells
Reaction & Rotary Torque Transducers
Multi Axis - Load, Force & Torque Transducers
Pressure Sensors , Level Sensors
Mounting Accessories for Load Cells
Electronic Instrumentations & Software
Customized Sensors
Kg to Pound Converter
kg
lbs
kgf/cm
2
to PSI Converter
kgf/cm
2
PSI
Newton Meter to Pound-Inch Converter
n-m
lb-in
Rotary Torque Transducer
-
Shaft Mounted - Wireless Telemetry Type
Back
Model
:
TTD-SS-RPM-WL
Capacity
:
0-20NM to 0-50,000NM
Load Direction
:
Clock & Anticlock Wise
Type
:
Rotary Torque Sensor-Transducer-Wireless Telemetry Type
Industries
Electrical Motor Manufacturers
Robotics
Energy
Automotive
Aerospace
Application
Electrical Motor Power Effeciency Test
R & D
Torque in Alternator,Pump,Turbine Engines
Torque in Electric,Hydrolic,Pneumatic Motors
Description
:
ADI ARTECH’S Torque Transducer TTD-NC-RPM is dynamic rotary type torque sensor for accurate measurement of Torque, RPM and Power in Motor Testing. It is constructed from hardened SS 17-4 ph. material. This is strain gage based sensor with full temperature compensation over 1050C. It is embedded with measuring circuit, ADC, Microcontroller and wireless Transmitter. Compatible remote Display is provided with TORQUE, RPM and POWER. RPM is measured by Hall Effect Magnetic switch. It is very accurate, reliable and sturdy for industrial applications. It is compensated for axial and bending forces for accurate torque measurements. It is available from 0 to 20 NM to 0 to 50000 NM ranges. This is supplied with 1-Torque Sensor of suitable range, 2-Hall Effect Magnetic Sensor for RPM and 3- Display unit showing Torque, RPM and Power. TTD is available in wide variety of options: both ends shaft, both ends flange and combination of shaft & flange. Customized version can be provided as per user’s dimensions and capacity.
Features
:
0-20 to 0–50KNM Capacities available. Stainless Steel 17-4 PH construction for resistance against shock and overload. Serial RS485 Port - Modbus RTU Protocol is offered optionally. Torque vs. Angle of rotation in testing equipment or specimen can be offered in place of RPM.