HOME
PRODUCTS
SOFTWARE
KNOWLEDGE
ABOUT ADI ARTECH
WHY ADI ARTECH
CLIENTS
OUR INFRASTRUCTURE
CONTACT US
Products
Home
Products
Search by Parameters
Load Cells - Weighing & Load Measurements
Load Cells - Force, Impact & Thrust Sensing
Tension Load Cells, Tension Transducers
Static Reaction & Dynamic Rotary Torque Transducers
Multi Axis - Load, Force & Torque Transducers
Pressure Sensors , Level Sensors
Mounting Accessories for Load Cells
Electronic Instrumentations for Strain, Load, Force, Torque, Pressure Measurements
Software for Strain , Load Cell , Force , Torque , Pressure Measurement and Analysis
Kg to Pound Converter
kg
lbs
kgf/cm
2
to PSI Converter
kgf/cm
2
PSI
Newton Meter to Pound-Inch Converter
n-m
lb-in
Flanged Torque Sensor with Square Drive
-
TTS-F-SQ
Back
Model
:
TTS-F-SQ
Capacity
:
0 - 50 NM to 0 - 5000 NM
Load Direction
:
Clock & Anticlock Wise
Type
:
Torque Transducer / Torque Sensor Flange - Squere Drive Type
Industries
Electrical Motor Manufacturers
Robotics
Medical & Health Care
Automotive
Assembly Lines
Aerospace
Application
Torque Measurement in Automotive & Aerospace
Torque Measurement in Industrial Valves & Actuators
Torque Sensing in Bottle Cap Sealing & Removal
Torque test in inserting needle into the syringe tip
Description
:
This is static reaction torque transducer, flange mount with female SQ Drive at loading end. It is designed for industrial and research applications. It is constructed from Electroless Ni plated tool steel for harsh industrial applications. TTS-F-SQ-F is strain gage based sensor with full temperature compensation over 10 to 50C. It is compensated for axial and side loads for very good linearity and low hysteresis. It is very compact and easy to install into the applications. It is available from 0 - 100 NM to 0 – 10KNM capacities to cover vide industrial applications. It is suitable for clock wise and anti-clock wise directions. This sensor can be supplied with factory calibrated instrument with display, computer interface etc.
Features
:
Very compact and rugged for heavy duty applications. Compensated for axial and bending moments for good accuracy. Gage area is sealed for IP 65 degree of environmental class. Can be supplied as per customers required size and capacity. Both end shaft or one end shaft and other end flange type OR mixed combination also can be supplied.
Electronic Instrumentation / Software
:
We supply optionally the following- Compatible Instrument with 4-20 mA / 0-2 Volt Output. Digital Version with RS-485 interface / USB output. Blue Tooth Or Wireless Telemetry. Software for Graphic, Tabulation, Reporting And Analysis.